|
|
|
|
|
|
|
|
|
|
Power network meter - N13 |
|
|
Power network parameters meter N13 type is destined to measure all basic parameters in 3-phase 3-wire or 3-phase 4-wire, balanced or unbalanced power networks, with the simultaneous display of measured qunatities
and the digital transmission of their values and their conversion into an analogue standard signal.
N13 type meter ensures the measurement and the monitoring of:
- rms a.c. voltage and a.c. current,
- neutral wire current,
- active, reactive and apparent power,
- active, reactive and apparent energy,
- different power factors,
- THD for phase voltages (available through RS485),
- THD for phase currents (available through RS485),
- frequency, average active power (e.g. 15 min).
It also enables the control and optimization of power engineering electronic devices. Voltages and currents are multiplied by given ratios of voltage and current measuring transformers. Power indications take into consideration the values of programmed ratios. N13 type meter also indicates the real time.
The meter may be configured using buttons or our free LPCon software(PD10 converter may be required).
Meter is used in computer systems for monitoring of power network parameters
- input: programmable - 100 V, 400 V, 1 A, 5 A a.c.,
- output: relay, analog, digital RS485 with MODBUS protocol
- supply: 85...253 V d.c. or a.c 40...400Hz,
- display field: 4 x 4 digits LED, 10mm high, red or green colour.
External dimensions: 96 x 96 x 70.5mm
See comparison of our power network meters and analyzer. |
|
|
|
|
|
|
|
|
Design and programming: Ideo |
|
;)
